Problem :
we got a shiny new DL380 Gen 9 Server – Windows 2012R2 (Hyper-V Role) installed on it.
Networking through HP Ethernet 1Gb 4-port 331i Adapter.
Server is connected to ProCurve Switch 3400cl-48G through 4 Cables (NIC-Teaming) – had it conected with only 1 Cable before – got same Problem. (Server/Switch – all latest Firmware/Drivers)
Once in a while the Server loses Network Connectivity – physical Link stays up but the connection drops the Gateway …
When querying the ARP-Cache on the Server it shows me:
Gateway-IP-Address 00-00-00-00-00-00 invalid
So it lost the MAC of the Gateway … ?!?
When I plug out/in the Cable – all work’s without problems again. (Can also just disable Switch-Port and re-enable it)
Solution:
Update: Since I disabled VMQ/Large Send Offload V2 on all LOMs yesterday -no more Network Troubles …
Executed those Commands for every LOM:
Set-NetAdapterAdvancedProperty “Embedded LOM 1” -DisplayName “Large Send Offload V2 (IPv4)” –DisplayValue Disabled
Set-NetAdapterAdvancedProperty “Embedded LOM 1” -DisplayName “vmq vlan filtering” –DisplayValue Disabled
Set-NetAdapterAdvancedProperty “Embedded LOM 1” -DisplayName “Virtual Machine Queues” –DisplayValue Disabled
What puzzles me a bit is that this known Broadcom+VMQ Problem should be solved with Broadcom Driver b57nd60a.sys Version 16,8 or higher as far as I know? (HP Changelog / Broadcom Driver Changelog)
Posted from:
https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380g9-network-troubles/td-p/6784457
More